FULLAS FPG7200 / 10.24kWh INDUSTRIAL UPS POWER STATION
10.24kWh Industrial
UPS Power Station
The FPG7200 is a 230V AC industrial UPS power station with a 10.24kWh LiFePO₄ battery and 7,200W rated output. With IP65 protection and a wheeled design, it supports industrial backup, heavy-duty tools and mobile worksites.
01 / One system, three roles
Industrial power for backup, tools and emergency supply.
The FPG7200 is an industrial UPS power station combining 10.24 kWh battery capacity, 7.2 kW continuous output and fast UPS backup. Designed for compatible critical equipment, heavy-duty tools and temporary power needs, it provides reliable power across demanding work environments.
UPS BACKUP
Keep critical equipment running.With a UPS transfer time of less than 20 ms, the FPG7200 helps compatible equipment switch to battery power when the mains supply is interrupted.
INDUSTRIAL TOOL POWER
Power demanding job-site tools.Its 7.2 kW continuous output supports compatible high-power equipment and motor-starting loads within the specified overload limits.
TEMPORARY & EMERGENCY POWER
Supply power where the grid is unavailable.With 10.24 kWh of battery capacity and a wheeled design, the FPG7200 provides portable power for field repairs, power outages and emergency response work.
02 / Power with headroom
Power for the tools. And the moment they start.
Air compressors and cutting machines can draw high starting currents, while welders and other heavy-duty equipment demand sufficient power under load. The FULLAS FPG7200 combines 7.2 kW of continuous output with up to 21.6 kW peak output and documented overload performance.
Its pure sine wave AC output supports compatible power tools and sensitive electronics. Check both the running wattage and start-up requirements of your equipment before use.
03 / PROTECTION & OPERATING PERFORMANCE
Designed for demanding working conditions.
The FULLAS FPG7200 combines fast UPS transfer, IP65 protection, LiFePO₄ battery management and fanless natural cooling. Its operating features support industrial backup power and mobile applications across different working environments.
Fast UPS switchover
Battery backup takes over in less than 20 milliseconds, supporting continuity for equipment compatible with this transfer time.
Dust-tight. Water-jet protected
A protective enclosure designed for demanding environments, with salt-spray resistance also stated in the brochure.
Cold-weather capability
Built-in intelligent cell heating supports cold-weather use. The brochure states full-power discharge at −15°C.
Substantial energy storage
10.24 kWh of lithium iron phosphate storage, supported by a self-developed AC-BMS for battery management.
Fanless, quiet-mode operation
Natural convection cooling eliminates the cooling fan. Quiet mode is specified below 30 dB.
Recharge and return to work
Up to 3.6 kW AC input and a stated 0–100% charge time below 3.5 hours, using a suitable mains supply.
03 / PROTECTION & OPERATING PERFORMANCE
Designed for the demands of industrial work.
The FPG7200 features a reinforced metal frame, integrated handles and wheels for easier positioning on site. Its front-facing display and grouped, protected connections provide convenient access to controls and power outlets during operation.
- Pure sine wave 230V AC output for compatible equipment
- V-0 flame-retardant enclosure with metal reinforcement
- Class I electrical protection
- Regional socket configurations for EU, FR and UK markets
05 / RUNTIME ESTIMATION
How long can the FPG7200 power your equipment?
With 10.24 kWh of battery capacity, the FPG7200 provides energy for industrial equipment, power tools and backup applications. Enter your average continuous load to estimate how long the system can operate.
The battery is specified for 3,000 cycles to 80% remaining capacity at 25°C, under 0.5C charge and discharge conditions. Energy efficiency is rated above 95% under the brochure’s stated test conditions.
Runtime estimate: Based on 10.24 kWh × 90% assumed usable energy ÷ average load. The 90% factor is an illustrative planning assumption, not a measured AC output figure. Actual runtime varies with load and operating conditions.
Estimate for a constant 1,000 W average load. Not a guaranteed runtime.
06 / FPG7200 APPLICATIONS
Power for the worksite. Ready for the unexpected.
From construction sites and field maintenance to location production and backup power, the FPG7200 delivers 7.2 kW of continuous AC output and 10.24 kWh of stored energy for compatible equipment wherever reliable mains power is limited or unavailable.
Construction & Repair Sites
Power tools where the work happens.Supply compatible welders, air compressors and cutting machines on construction and renovation sites. Check equipment running power and starting requirements before connection.
Film & Location Production
Reliable power for on-location work.Run compatible lighting, cameras and production equipment with battery power. Fanless natural cooling and quiet-mode operation below 30 dB make the FPG7200 suitable for noise-sensitive locations.
Municipal & Field Maintenance
Power for maintenance beyond the grid.Support road maintenance, outdoor repairs and municipal service operations with mobile AC power, without relying on nearby fixed outlets.
Telecom & Security Backup
Keep critical equipment connected.Provide UPS backup for compatible telecommunications, monitoring and security equipment. Transfer to battery power in less than 20 ms when mains power is interrupted.
Workshops & Technical Facilities
Power for precision work and equipment.Supply compatible instruments, electronic equipment and workshop tools with pure sine wave AC output and stable 230V power.
Emergency & Essential-Load Backup
Keep essential loads running during outages.Use 10.24 kWh of battery capacity to supply selected essential equipment during unexpected power interruptions. Building integration requires a suitable professional installation.
07 / APP MONITORING
Monitor FPG7200 Power Status Through the Mobile App
Connect the FPG7200 to its compatible mobile app to check key operating data, including battery level, input and output power, and usage history. Monitor system status, review fault information and manage supported software updates from your mobile device.
Live Power & Battery Monitoring: View real-time battery level, input power and output power.
Fault Alerts: Check system alerts and fault information to help identify abnormal operating conditions.
Usage History: Review operating time, energy consumption and historical power data.
OTA Firmware Updates: Install available system updates through the app on supported configurations.
08 / Technical details
Şu teknik özellikler:
mühendisler için önemlidir.
FPG3600 için yayınlanmış temel parametreler. Aşağıdaki teknik özellik kategorilerinden birini seçin.
AC output & UPS
| Nominal çıkış gücü | 7,200 W continuous |
|---|---|
| Tepe güç | 21,600 W |
| Nominal çıkış gerilimi | 230 V AC |
| Çıkış gerilimi aralığı | 230 ± 5 V AC |
| Çıkış frekansı | 50 Hz (EU version)50/60 Hz listed in general specification. |
| Dalga şekli | Saf sinüs dalgası |
| UPS switchover | < 20 ms |
| Overload: 8.0–10.8 kW | > 500 s |
| Overload: 10.8–14.4 kW | > 50 s |
| Overload: 14.4–18.0 kW | > 10 s |
| Maksimum çıkış akımı | 140 A |
| Boşta güç tüketimi | ≤ 30 W |
Battery & charging
| Battery chemistry | LiFePO₄ |
|---|---|
| Nominal capacity | 10,240 Wh / 10.24 kWh |
| Cell configuration | 3.2 V × 20 Ah × 20S × 8P |
| Cycle life | 3,000 cycles to 80% capacity0.5C charge/discharge, 25°C |
| Energy efficiency | > 95% |
| Maximum AC input | 3.600 W |
| Rated input voltage/current | 230 V AC / 16 A |
| Giriş gerilimi aralığı | 180–265 V AC |
| Giriş frekans aralığı | 45–65 Hz |
| Input quality | THDi < 5%; PF > 0.95 |
| Charge time, 0–100% | < 3.5 hours |
| Battery management | Self-developed AC-BMS |
| Cold-weather support | Built-in intelligent cell heating |
Protection & operating conditions
| Giriş koruması | IP65 |
|---|---|
| Electrical protection | Sınıf I |
| Enclosure | V-0 flame-retardant material; metal-reinforced structure |
| Soğutma | Natural convection; fanless |
| Gürültü | < 30 dB in quiet mode |
| Discharge temperature | −15°C to 55°C |
| Charge temperature | 5°C ila 40°C |
| Saklama sıcaklığı | −20°C to 50°C |
| Çalışma nemi | 10–90% RH |
| Depolama nemi | 5–95% RH |
| Çalışma irtifası | < 2,000 m |
| Enclosure treatment | Salt-spray resistance |
Dimensions, configuration & support
| Model | FPG7200 |
|---|---|
| Brand | FULLAS |
| Net ağırlık | 104 kg |
| Dimensions (W × H × D) | 526 × 485 × 611 mm |
| Hareketlilik | Wheeled trolley with integrated frame and handles |
| Socket options | EU / FR / UK / AU / GB / CH |
| Warranty | 4 years |
| Partner samples | Available for evaluation |
| Production availability | Contact FULLAS |
Standards & documentation
| Standards listed | EN/IEC 62040-1; EN/IEC 62477-1; EN/IEC 62619; EN IEC 61000-6-2/-4; EN 300328; EN 301489-1/-17; EN 62479; UN 38.3 |
|---|---|
| Documentation | CE, CB, EMC, UN 38.3, RoHS, REACH and SDS |
FULLAS FPG7200
7.2kW Industrial Power Station
The FULLAS FPG7200 is a 230V AC industrial power station with 7,200W continuous output and 10.24kWh LiFePO₄ battery capacity. Designed for industrial backup power, heavy-duty equipment and mobile worksites, it delivers pure sine wave AC power, UPS switchover in under 20 ms and reliable power for demanding applications.